Make sure to clean the unit after every use to avoid odors, bacteria and mold. Keeping your unit clean will maximize the life of your unit.
Note: When turning off the power, it may take 2 to 3 seconds for the unit to clear the lines and power down completely.
Emptying the dirt water tank:
1. Press the release button and remove the tank.
2. Lift out inner float mechanism. DO NOT pour out dirty water until float is removed.
3. Pour dirty water down the drain.
4. Remove the filter cover, then lift out the filter. Wash the filter with soap and water, then allow it to air-dry completely before reinstalling.
Maintaining the brushroll:
- Pull the latch to remove top brushroll cover.
- Lift the brushroll door to open.
- Remove the brushroll by pulling up on the side tab. If hair is wrapped, cut it away.
- Wash the brushroll, cover, and doors, allowing them to completely air-dry before reinstalling.
- To reinstall the top brushroll cover, connect the 2 hooks at the bottom, then push forward until it clicks into place.
Hand tools and hose
- Press the release button to detach tool.
- Pull tab to remove window and bristle strip.
- Wash the tools with soap and water.
- Allow them to completely air dry before reinstalling.